Lr-baggs iMix Onboard User Manual Page 1

L.R. BAGGS PPEAMPS483 N. FRONTAGE RD.NIPOMO, CA 93444WWW.LRBAGGS.COMiMIX ONBOARDINSTALLATION MANUAL AND USER'S GUIDET A B L E O F C O N T E N

The iBeam fits x-braced guitars with at least three inches of flat open space directly under the saddle (see figure 1).For new installati

each of the screw holes and then drill out the holes using a #45 drill bit (.082” or 2.08 mm). Cut out the area for the preamp carefully and

Though the Element will mask some of the characteristics of a non-optimum iBeam placement, we strongly encourage the installer to i

fig. 6fig. 7tie blocksaddle slotbridgeiBeamdrill pin hole herebridgefig. 8This top-down view depicts the bridge withthe saddle removed. These pin hole

The optimum location will deliver a sound that is focused and tight, with proper string balance and good presence. It will capture enough of

Important: The fit of the saddle in the slot is the single most important factor in this installation. It is crucial that the bottom of the slot and

3. Mix control: The position of this knob will determine how much of each pickup's signal will be present in the overall mix